دانلودها

بلوک دیاگرام:

Hardware:

Software(Sources for IAR):

1 .ADC: ADC0_AD3 as analog switch

2 .AIC:

       1. PIO interrupt test code

       2. IRQ interrupt test code

       3. FIQ interrupt test code

       4. Software interrupt test code

       5. TC interrupt test code

3 .CAN: basic test code

4 .GPIO: basic GPIO, RSTC test code

       1. IO

       2. Open-circuit output

       3. Parallel output

       4. Pull up control

       RSTC: basic using, key button reset

5 .PIT: basic using, for the periodic interrupt

6 .PWC: basic using:

       1. Set system clock by PWC

       2. Set each peripherals clock by PWC

       3. Output 4.608MHz by the programmable external clock PCK0 of PWC

       4. To enter the idle mode

7 .PWM: basic using, output 6MHz clock by PWM0

8 .RTT: basic using, real-time clock value increased by 1 per second, Generate an interrupt

       DBGU: basic using, print RTC value per second via serial port

9 .SPI: basic using

       1. Access data of external DATAFLASH CARD - AT45DCB008 by SPI0

       2. Access data of external DATAFLASH CARD - AT45DB321c by SPI0

10. SSC: basic using, configure SSC0 as I2S interface, transfer data between DCA3550

11. TC: basic using, C0, TC1 as 16bit timer

12. TWI: basic using, implement I2C by TWI, access 2-wire EEPROM

13. USART: basic using, configure two USART port and one DBGU port to three USART ports.

PDC: setting

14. USB: basic USB-CDC using, communication with PC by interrupt

15. WDT: basic using

16. MICRONET example: to build web server

17. UC/OS II example

مکانیکال

دانلود ها